Home / Products / 60.00*28.00*6.50*8.35 DIN 6796 conical washers and same-size spherical derivatives / DIN 6796 dimensional spherical +1 (S/R) convex washers
60.00*28.00*6.50*8.35 Dimensions, standards and downloadable engineering files are generated from published product data.
Inquiry SPECIFICATION
Product data Joint-level assembly parameters require engineering review
Outside diameter De 60.00 mm
Inside diameter Di 28.00 mm
Product thickness t 6.50 mm
Free height l₀ 8.35 mm
Cone height h₀ 1.85 mm
Standard DIN 6796 dimensions / spherical +1 (S)
Material / surface treatment FSt (PHOSPHATE_OIL)
Temperature — – — °C ENGINEERING FILES
CAD / DXF / STEP Repository CAD · member download Open full drawing preview DWG DIN 6796-M27-S+1 DWG CAD JH-SW-DIN-6796-M27-S-1-P2127-EN-R01.dwg · 50 KB
Member download DXF DIN 6796-M27-S+1 DXF CAD JH-SW-DIN-6796-M27-S-1-P2127-EN-R01.dxf · 127 KB
Member download STEP DIN 6796-M27-S+1 STEP CAD JH-SW-DIN-6796-M27-S-1-P2127-R01.step · 22 KB
Member download STL DIN 6796-M27-S+1 STL CAD JH-SW-DIN-6796-M27-S-1-P2127-R01.stl · 1.6 MB
Member download SPECIAL SURFACE GEOMETRY
Special-surface definition spherical-midline-v1 · A The meridian is defined by the mid-surface spherical radius S (R) and its orientation.
Surface family Spherical Disc Springs
Design code DIN 6796-M27-S+1
D 60.00 mm
d 28.00 mm
t 6.50 mm
H₀ 8.35 mm
RI 0 mm
RII 0 mm
RIII 0 mm
RIV 0 mm
Mid-surface spherical radius S (R) 157 mm
Camber ratio gamma_W (design rule) 0.11
Spherical orientation Convex
CAD geometry status defined
FEM validation status not_started Only geometry revisions linked to a formal product, technically approved and published are shown. FEM status alone is not a performance claim.
ENGINEERING OVERVIEW
Candidate decision overview Data version 3 GEOMETRY CONTRACT Spherical profile
Bearing surfaces No
Tolerance grade See dossier / confirm Special surface parameters must be reviewed against the released drawing; the profile name alone is not a complete geometry definition.
EVIDENCE COVERAGE — Manufacturer curve / stressNot public — Polysplendid calculationsNot public — Resolved standardsNot public — Inspection dossierNot public — Approved product FEMNot public
A missing FEM record is not evidence of failed validation. It means no approved product-level study is public on this page.
COMBINATION BOUNDARY Review the complete bolted joint DIN 6796 washers compensate settlement and help maintain preload in predominantly axial short bolted joints. They are not an independent safeguard against self-loosening under alternating transverse load. Tightening torque requires thread, friction and assembly-method inputs.
RELATED ENGINEERING
Related technical resources RELATED ENGINEERING
Relevant specifications RELATED ENGINEERING
Continue your engineering task 
Open full drawing preview